PDA

View Full Version : Upgrades to the cockpit

Nikkia
06-20-2009, 12:42 AM
http://i9.photobucket.com/albums/a58/veebee1/003-3.jpg
http://i9.photobucket.com/albums/a58/veebee1/004-6.jpg
http://i9.photobucket.com/albums/a58/veebee1/006-3.jpg
http://i9.photobucket.com/albums/a58/veebee1/016-1.jpg
http://i9.photobucket.com/albums/a58/veebee1/013-2.jpg

Guages and guage controller arrived today...Found out last week that greddy discontinued their SMI controller but also found out that the controller is actually made by Nippon Denso so the Defi controller will control the following electronic guages:

Greddy SMI
Defi BF
TRD
HKS
Blitz
Apex

The Boost Controller was delayed and is on back order it's suppose to arrive in 2-3 weeks but anyways here is the look I'm shooting for with a few diffrences here and there:

http://i9.photobucket.com/albums/a58/veebee1/c5e994a7.jpg

Below the guages on the Pillar you will see there is a A/C vent that is exactly 60mm in that vent I will be placing the Greddy SMI EGT guage, under that you will notice that there is a space that is pretty much blank..There I will have a 60mm hole drilled for the Greddy SMI Fuel Pressure guage. Where my current boost guage is I will have the opening enlarged to 60mm and have the Greddy SMI water temp installed. After the Boostcontroller is installed it will be mounted either on the base of the steering wheel or beneath the radio.
SeeingRed
06-20-2009, 10:01 AM
Awesome deal.

What ever happened to normal boost gauges?
Black_Bullitt
06-20-2009, 11:09 AM
Nice stuff :t)
Speeddmn
06-20-2009, 04:34 PM
Awesome deal.

What ever happened to normal boost gauges?

bet it's metric or something...


Actully it looks like its the bar scale, means the same, just read diffrentely!
Nikkia
06-20-2009, 08:13 PM
What ever happened to normal boost gauges?

I know right.. they are quite easy to read once you remember that 1.0-x-bar = 14.7 psi
CaballoBlanco
06-20-2009, 10:42 PM
That will look pretty sweet.
SeeingRed
06-21-2009, 03:20 AM
I know right.. they are quite easy to read once you remember that 1.0-x-bar = 14.7 psi

I suppose. :look:
Speeddmn
06-21-2009, 08:07 AM
I think it would be easier to remember 14.7 if the gauge read 14.7!

But once you whoop someones ass and say you had the boost gauage pegged then they look and see it says 2.0 they will shit a brick, lol
Nikkia
06-21-2009, 12:39 PM
I think it would be easier to remember 14.7 if the gauge read 14.7!


What can I say I like doing Algebra at the track...:D


But once you whoop someones ass and say you had the boost gauage pegged then they look and see it says 2.0 they will shit a brick, lol

:rofl: